Model Number: CLG4165
Brand Name: ORIEMAC
Key Specifications/Special Features:
Small grader for sale CLG4165 with cheap price
EngineDCEC 6BTAA5.9-C180
| Rated Power |
(kW) |
125(170)@2200 |
| Blade Width |
mm(inches） |
3960(156) |
| Maximum Speed |
km/h (mph) |
38 (23.6) |
| Draw Bar Pull |
（kN) |
81.6 |
| Operating Weight |
kg(Lb) |
15000 |
| ENGINE |
| Tier |
|
II |
| Make |
|
Dongfeng Cummins |
| Gross Power |
kW(Hp)@rpm |
125(170)@2200 |
| Net Power |
kW(Hp)@rpm |
113(151)@2200 |
| Peak Torque |
|
750N.m/1300rpm |
| Torque Rise % |
|
30% |
| Number of Cylinders |
|
6 |
| Aspiration |
|
turbo air-to-air aftercooled |
| TRANSMISSION |
| Transmission Type |
|
power shift |
| Transmission Configuration |
|
6f/3r |
| Torque Converter |
|
three-member single turbine |
| Maximum Travel Speed, fwd |
（km/h） |
38 |
| Maximum Travel Speed, rev |
（km/h） |
24.7 |
| Number of Speeds, fwd |
|
6 |
| Number of Speeds, rev |
|
3 |
| AXLES |
| Front Axle Make |
|
LiuGong Weld axle |
| Rear Axle Make |
|
Meritor |
| Differential Type |
|
NO-SPIN limited slip standard |
| Final Drive Type |
|
chain drive |
| Axle Oscillation |
|
±15° |
| Front Axle Type |
|
all welded steel frame |
| Front Axle, Wheel Lean Angle |
|
±17° |
| STEERING |
| Steering Configuration |
|
load sensor steering gear |
| Steering Relief Pressure |
（Mpa） |
17 |
| Minimum Turning Radius |
(inches） |
7800(307) |
| Steering Angle |
|
±45° |
| Frame Articulation Angle |
|
±20° |
| BRAKES |
| Service Brake Type |
|
(Dry )shoe |
| Service Brake Location |
|
ear axle only |
| Service Brake Actuation |
|
hydraumatic |
| TIRES |
| Tire Size |
|
17.5-25 PR12/L3 |
| HYDRAULIC SYSTEM |
| Main Pump Type |
|
gear |
| Main Relief Pressure |
（Mpa） |
18 |
| Pilot Pump Flow |
L(Gal)/min |
126(33) |
| WORKING CAPACITIES |
| Maximum Draw Pull |
（kN) |
81.6 |
| Cutting Pressure |
kg(Lb) |
6800(14991) |
| TANDEM DRIVE PERFORMANCE |
| Height |
mm(inches） |
600(24) |
| Width |
mm(inches） |
210(8) |
| Thickness, inner wall / outer wall |
mm(inches) |
20/20(0.8/(0.8) |
| Center Distance |
mm(inches) |
1538(61) |
| Oscillating Angle |
|
±15° |
| MOLDBOARD PERFORMANCE |
| Bank Cut Angle |
|
40~70 |
| Moldboard Lift Above Ground |
mm(inches） |
450(18) |
| Moldboard Side Shift, right / left |
mm(inches） |
725/675(29/27) |
| Maximum Sloping Angle |
|
90° |
| Cutting Depth |
mm(inches） |
555(22) |
| Circle Rotation |
|
360° |
| Circle Diameter |
mm(inches） |
1455(57) |
| Circle Thickness |
mm(inches） |
135(5) |
| DIMENSIONS |
| Wheelbase |
mm(inches） |
6230(245) |
| Overall Length |
mm(inches） |
8790(346) |
| Overall Height with Cab |
|
3438(135) |
| Overall Width |
mm(inches） |
2600(102) |
| Clearance under Front Axle |
mm(inches） |
645(25) |
| Moldboard Standard Length |
mm(inches） |
3960(156) |
| Moldboard Standard Thickness |
mm(inches） |
19(0.7) |
| Moldboard Standard Height |
mm(inches） |
610(24) |
| OPERATING WEIGHTS |
| Operating Weight |
kg(Lb) |
13900(30644) |
| On Front Wheels |
kg(Lb) |
3960(8730) |
| On Rear Wheels |
kg(Lb) |
9940(21914) |
| SERVICE CAPACITIES |
| Fuel Tank |
L(Gal) |
230(61) |
| Engine Oil |
L(Gal) |
22(6) |
| Cooling System |
L(Gal) |
40(11) |
| Hydraulic Reservoir |
L(Gal) |
186(49) |
| Transmission And Torque Converter |
L(Gal) |
45(12) |
| Tandems, Each |
L(Gal) |
28(7) |
By certification [File Integrity]
